263
A reneszánsz év alkalmából rendhagyó programokkal, új kiállításokkal várja az idén Ozorán a Pipó várkastély és Füzérradványban a Károlyi kastély a látogatókat. A Műemlékek Nemzeti Gondnokságának e két épülete jelentős építészeti, kultúrtörténeti emlékhelyei a reneszánsz korszaknak, így ezek lesznek a helyszínei a szellemi, filozófiai, kulturális és művészeti átalakulást, megújulást hozó stíluskorszak, a reneszánsz világ élményszerű bemutatásának.
...a folytatásért kattintson a címre
...a folytatásért kattintson a címre
Odkaz na príspevok: https://www.vlaky.net/diskusia/link/240132/
Matthias, the Little brother 56E1 & his big sister 263 absolutely identical. 3D model which I made show only the half (diode) part of U01.1 bridge for motors M01-M03.
In 56E1 that bridge feed 2 motors M01-M03. So in the right side of V21-V24 is other half (thyristor) V11-V14.
To explain the path of cooling oil I made full U01.1 bridge which composited by 2 normal Graetz's bridges series connected.
U01.1 for M01-M03: http://dido73bdz2.hit.bg/56E/Ramo_V21-V24_V11-V14_Logo.pdf
U01.1 for M01-M03 Back view: http://dido73bdz2.hit.bg/56E/Ramo_V21-V24_V11-V14_Back_Logo.pdf
Under that U01.1 is other bridge U01.2 for M02-M04 unshowed on 3D model.
On the top is oil cauldron connected 2 left (incoming (position 1)) & right (outgoing (position 9)) pipes.
The oil cooler sistem is full. Blue arrow show direction of the cold oil stream superchargered by pump.
Red arrow show direction of the heat oil stream pumped out by pump.
Cold oil stream go in to left (incoming) pipe (position 1), go past through all hoses (position 3) & entering to diode's cooler bodies (position 3).
The oil take off the heat of the diodes, then go past through all back hoses (position 8) & entering to thyristor's cooler bodies (position 11).
The oil take off the heat of the thyristors, then go past through all hoses (position 12) & go out from outgoing pipe (position 9).
In 56E1 that bridge feed 2 motors M01-M03. So in the right side of V21-V24 is other half (thyristor) V11-V14.
To explain the path of cooling oil I made full U01.1 bridge which composited by 2 normal Graetz's bridges series connected.
U01.1 for M01-M03: http://dido73bdz2.hit.bg/56E/Ramo_V21-V24_V11-V14_Logo.pdf
U01.1 for M01-M03 Back view: http://dido73bdz2.hit.bg/56E/Ramo_V21-V24_V11-V14_Back_Logo.pdf
Under that U01.1 is other bridge U01.2 for M02-M04 unshowed on 3D model.
On the top is oil cauldron connected 2 left (incoming (position 1)) & right (outgoing (position 9)) pipes.
The oil cooler sistem is full. Blue arrow show direction of the cold oil stream superchargered by pump.
Red arrow show direction of the heat oil stream pumped out by pump.
Cold oil stream go in to left (incoming) pipe (position 1), go past through all hoses (position 3) & entering to diode's cooler bodies (position 3).
The oil take off the heat of the diodes, then go past through all back hoses (position 8) & entering to thyristor's cooler bodies (position 11).
The oil take off the heat of the thyristors, then go past through all hoses (position 12) & go out from outgoing pipe (position 9).
Odkaz na príspevok: https://www.vlaky.net/diskusia/link/240123/
I believe it flows through the gray tube on the left.
Yes, offcourse.
How does it specifically take the heat off of the diodes?
How..how...
The cooler takes heat from the semiconcuctor structure and the cooler (it's that orange cylindric body between semiconductors) is cooled by circuling oil medium.
Do you know, how does the central heating in buidings work?
That is the same.
peršing:
209 má(la) ak sa nemýlim rekuperačnú EDB.
Yes, offcourse.
How does it specifically take the heat off of the diodes?
How..how...
The cooler takes heat from the semiconcuctor structure and the cooler (it's that orange cylindric body between semiconductors) is cooled by circuling oil medium.
Do you know, how does the central heating in buidings work?
That is the same.
peršing:
209 má(la) ak sa nemýlim rekuperačnú EDB.
Odkaz na príspevok: https://www.vlaky.net/diskusia/link/240105/
Dido73, thanks for your stuff.
These are quite interesting pictures indeed.
Could you elaborate the Diode shoulder though?
The description is beyond my comprehension, since I don't understand the language
What intrigues me most is the path of cooling oil. (I assume oil was selected as the cooling medium here)
I believe it flows through the gray tube on the left.
How does it specifically take the heat off of the diodes? Could you elaborate on that? I know oil-cooling was used on big sisters 263s as well, but the operational details of how the liquid gets into contact with the semiconductors always escaped me.
These are quite interesting pictures indeed.
Could you elaborate the Diode shoulder though?
The description is beyond my comprehension, since I don't understand the language
What intrigues me most is the path of cooling oil. (I assume oil was selected as the cooling medium here)
I believe it flows through the gray tube on the left.
How does it specifically take the heat off of the diodes? Could you elaborate on that? I know oil-cooling was used on big sisters 263s as well, but the operational details of how the liquid gets into contact with the semiconductors always escaped me.
Odkaz na príspevok: https://www.vlaky.net/diskusia/link/239336/
A very delicate block A141 - LSO in little brother of 263 - 56E1 (Bulgarian 61-000 to 61-020)
Full image format: http://dido73bdz2.hit.bg/56E/61_A141_LSO.jpg
Full image format: http://dido73bdz2.hit.bg/56E/61_A141_LSO.jpg
Odkaz na príspevok: https://www.vlaky.net/diskusia/link/239098/
Part of electronic block A110 - RKM sub-block in little brother of 263 - 56E1 (Bulgarian 61-000 to 61-020)
Full image format: http://dido73bdz.hit.bg/56E/61_A110_RKM.jpg
Full image format: http://dido73bdz.hit.bg/56E/61_A110_RKM.jpg
Odkaz na príspevok: https://www.vlaky.net/diskusia/link/239045/
Part of electronic block A110 - NRP sub-block
Full image format: http://dido73bdz.hit.bg/56E/61_A110_NRP.jpg
Full image format: http://dido73bdz.hit.bg/56E/61_A110_NRP.jpg
Odkaz na príspevok: https://www.vlaky.net/diskusia/link/239044/
Central power supply for electronic in little brother of 263 - 56E1 (Bulgarian 61-000 to 61-020)
http://dido73bdz.hit.bg/56E/CN_2-2_1_small.jpg
http://dido73bdz.hit.bg/56E/CN_2-2_1_small.jpg
Odkaz na príspevok: https://www.vlaky.net/diskusia/link/239042/
Diode shoulder from U01 in little brother of 263 - 56E1 (Bulgarian 61-000 to 61-020)
http://dido73bdz.hit.bg/CAD/Ramo_V21-V24_3D_Logo.pdf
http://dido73bdz.hit.bg/CAD/61_V21-V24.jpg
http://dido73bdz.hit.bg/CAD/Ramo_V21-V24_3D_Logo.pdf
http://dido73bdz.hit.bg/CAD/61_V21-V24.jpg
Odkaz na príspevok: https://www.vlaky.net/diskusia/link/239041/
ja som z toho eleho príspevku vyčítal že sa jedná o nejakého ožrana a pipa Ozorán a Pipó